UE on an LG washer means the load is unbalanced. LG also lists this as Ub on some front-loaders. The washer has detected that the laundry is bunched on one side, the load is too large or too small for a stable spin, or the cabinet is not level. It is not a drain error, and it is usually fixed by redistributing the clothes and checking the leveling legs.
Last updated: November 17, 2026.
If the tub will not empty and the code is OE, use our LG washer OE code guide instead. For more washer help, see the washing machines hub.
Safety first
Pause the cycle and wait for the drum to stop completely before you open the door or lid. If you need to adjust the leveling legs or pull the washer away from the wall, unplug it first and, if you must move it far enough to strain the hoses, shut the water taps off. Do not put your hand in a spinning drum.
How to fix an LG washer UE or Ub code
- Pause the washer and redistribute the load. LG says to take the laundry out, spread it evenly in the drum, and choose a spin speed that suits the load. Clothes piled on one side are the most common cause.
- Adjust the load size. LG’s front-load guides say the washer works best when the tub is about two-thirds full, so the items can move. A single heavy item, a drum stuffed too full, or a very small load can all throw the spin off. Remove some items from an oversized load, or add a few similar items to a tiny one.
- Use laundry nets the way LG describes. Fill a net only about two-thirds full. Do not wash a single net by itself; LG advises washing two or three nets with other clothes. An overloaded or solo net can cause vibration, noise, and a UE code, and can damage the laundry or the washer.
- Check that the washer is level. If the cabinet rocks when you nudge it front to back or side to side, adjust the leveling legs with the wrench or spanner that came with the washer so each leg sits firmly on the floor and the cabinet is as close to the floor as practical. LG also says to confirm with a level on the front of the top panel, then lengthwise down the middle. The bubble should sit in the center.
- Restart the cycle. On a top-loader, bulky bedding belongs on the Bedding course, one item at a time. LG warns that washing two duvets together, or a duvet with everyday clothes, on a Normal cycle can leave the load stuck to one side and trigger UE.
On some top-load models, LG says the washer may add water and try to untangle the load up to two times, which can add about 10 minutes to the spin. If the imbalance clears during that process, the spin continues normally. If UE keeps returning after you have evened the load and leveled the cabinet, stop repeating the same cycle and go to the service steps below.
Loads that often trigger UE
LG’s top-load and front-load support articles call out a few patterns that repeatedly unbalance the drum:
- Bedding and bulky items. Wash one duvet or similar bulky item on the Bedding course, and make sure it is fully submerged after the water fills. On front-loaders, LG says to wash pillow and cushion covers only, not the stuffed pillows themselves.
- Items LG says not to wash in the machine, including foot rugs, carpets, electric blankets, curtains, and rubber mats, which can damage the product or unbalance the tub.
- Puffer jackets and other bulky, light items on a top-loader: wash them after they are submerged, so they do not float and gather on one side.
- A single wet knit or a very small load can also stick to one side. LG suggests washing two or more knit items together and adding more laundry to an undersized load.
When to call a technician
If UE or Ub still appears after you have redistributed the load, used a sensible load size, and confirmed the washer is level and sitting firmly on the floor, LG’s UE/Ub guide says to request a repair. A damaged suspension, a failed sensor, or a cabinet that cannot be leveled on the floor you have may need a technician. Have your model number ready.
Parts and tools
You may need a level and the wrench or spanner that came with the washer to adjust the legs. Aftermarket leveling feet or pads are only useful if they match your model and the floor you have; the first step is still to level the legs LG already installed. Laundry nets should be sized so they stay no more than about two-thirds full.
Frequently asked questions
What does UE mean on an LG washer?
It is an imbalance, or unbalanced-load, error. Some front-loaders show Ub for the same condition.
What is the UE or Ub error code on an LG washer?
UE and Ub both mean the washer could not spin because the load or the cabinet was uneven. Follow the same steps for either display.
How do I fix a UE code on my LG washer?
Pause the cycle, spread the laundry evenly, keep the drum at about two-thirds full, and check that the washer does not rock. Adjust the leveling legs if it does, then restart.
Can one blanket or duvet cause a UE code?
Yes. LG says a duvet or other large item on a Normal cycle can stick to one side. Wash one bulky item at a time on the Bedding course, and make sure it is submerged.
Why does my LG ThinQ or inverter washer show UE?
The code has the same meaning on those machines: an unbalanced load or a washer that is not level. Use the steps above and the owner’s manual for any model-specific buttons. This page does not give a separate procedure for one series.
Related error codes
Related washer codes on this site: LG OE (will not drain), LG UE (unbalanced load), Samsung 4E or 4C (will not fill), Samsung Sud (too many suds), Whirlpool LoC (Control Lock). For more washer guides, see our washing machines hub.
Sources
- LG USA Support, Front Load Washer – Troubleshooting a UE/Ub Error Code — causes, two-thirds load, leveling, request a repair if it continues.
- LG USA Support, How to Resolve a UE (Unbalanced) Error — redistribute the load, laundry-net guidance, using a level.
- LG USA Support, UE Error Is Displayed (Front Load) — two-thirds capacity; items not to wash; leveling with the supplied spanner.
- LG USA Support, UE Error Is Displayed (Top Load) — Bedding course, laundry nets, small loads, puffer jackets, knits, extra rinse attempts.
- LG USA Support, Request Product Repair Service
Resource Links
- https://www.lg.com/us/support/help-library/front-load-washer-troubleshooting-a-ueub-error-code--20151504643089
- https://www.lg.com/us/support/repair-service/schedule-repair
- https://www.lg.com/us/support/help-library/front-load-washer-troubleshooting-a-ueub-error-code--20151504643089
- https://www.lg.com/us/support/help-library/lg-front-load-washer-how-to-resolve-a-ue-error--20154453962404
- https://www.lg.com/us/support/help-library/lg-front-load-washing-machine-error-code-ue-error-is-displayed--20154629490038
- https://www.lg.com/us/support/help-library/lg-top-load-washing-machine-error-code-a-ue-error-is-displayed--20155424864012
- https://www.lg.com/us/support/repair-service/schedule-repair