The heating element on a Whirlpool dryer is located in the back of the dryer near the blower housing.
In some models you can see the heating element from the outside of the dryer.
If you can’t see it from the outside you’ll need to remove the back panel to access the element.
To access the heating element you’ll need to unscrew the screws holding the back panel in place.
Once the panel is removed you’ll be able to see the element.
It will be connected to two wires which you’ll want to disconnect before attempting to remove the element.
Once the element is removed you’ll want to check the continuity of the element to ensure it’s working properly.
You can do this by using a multimeter to check the resistance of the element.
If the resistance is too low the element may need to be replaced.
When you’re ready to replace the heating element you’ll want to make sure you get the right one for your Whirlpool dryer.
You’ll need to make sure the element matches the voltage and wattage requirements listed in your Whirlpool dryer’s user manual.
Once you have the correct element you’ll simply need to connect the two wires to the new element and reattach the back panel.
Identifying The Heating Element
Once you have identified the make and model you can identify the heating element.
Generally speaking the element will be located at the very back of the dryer near the top.
It will usually look like a long cylindrical tube and will be made of metal.
However you should use caution when identifying the heating element.
If you try to touch it you may be at risk for an electric shock.
Instead use a flashlight and look for the element from a distance.
Replacing The Heating Element
If you need to replace the heating element you will need to unplug the dryer and access the back panel.
This can be done by unscrewing the screws that hold the panel in place.
Once the back panel is removed you will be able to see the heating element.
At this point you can unscrew the element and replace it with a new one.
Be sure to follow the instructions provided in the manual to ensure proper installation.
Conclusion
Finding the heating element in a whirlpool dryer can be tricky but it is doable.
Once you know the make and model of your dryer you can use the manual to identify the element and replace it if necessary.
Just be sure to take the proper safety precautions when attempting this task.
